FANUC Robotics America GFK-1535A - Manual (Page 41)

GFK-1535A 3- 1
Operation
This section explains how the NIU interacts with the modules in its station, how it
stores data, and how it exchanges data on the bus.
T NIU data memories
T Scanning inputs and outputs in the I/O Station
T Data transfer between the Genius NIU and the bus
T Genius bus scan time
Genius Hand-held Monitor Use
The Network Interface Unit does not have a Hand-held Monitor connection. A
Genius Hand-held Monitor cannot be used to configure, monitor I/O, or force and
unforce I/O.
If there is a Hand-held Monitor elsewhere on the bus, it will display the presence of
the NIU on the bus as an “unsupported device”.
Chapter
3