FANUC Robotics America GFK-1535A - Manual (Page 30)

GFK-1535A Chapter 2 Installation 2-11
2
Installing Additional Modules
Before joining carriers to the NIU, remove the connector cover on the righthand
side of the NIU. Do not discard this cover; you will need to install it on the last
carrier. It protects the connector pins from damage and ESD during handling and
use.
Do not remove the connector cover on the lefthand side.
Connector Cover
Connector Cover
Install additional modules by mounting modules on their carriers and sliding them
along the DIN rail to fully engage the connectors in the sides of the carriers.