7 changing waypoint mark size, 7 changing waypoint mark size (navchart, Furuno only) – Furuno GP-3500 User Manual

Page 86

5. WAYPOINT

5-14

5.7

Changing Waypoint Mark Size
(NavChart

/FURUNO only)

You may change the size of all waypoint marks to small or large, or turn them off.

1. Press the [MENU] key to show the main menu.
2. Press the [7] key to show the CHART SETUP menu.

If the CHART SETUP menu does not appear, rotate the [ENTER] knob
clockwise.

3. Rotate the [ENTER] knob to select “WAYPOINTS.”

7. CHART SETUP

GOTO CONTOUR LINES SETUP
OFFSET CHART POS

1. YES

2. NO

LAT/LON GRID

0. OFF

TEXT INFORMATION

1. YES

2. NO

WAYPOINTS

1. LARGE 2. SMALL 3. OFF

WAYPOINT NAME

1. LARGE 2. SMALL 3. OFF

CHART BORDER LINE 1. YES

2. NO

LANDMASS

0. OFF

TRIMMING BORDER LINE 0. OFF

BACKGROUND

0. OFF

TURN KNOB TO SELECT MENU.
SELECT THE ITEM OF EACH MENU BY TRACKBALL.

Chart setup menu

4. Press the appropriate numeric key to select “1. LARGE”, “2. SMALL” or “3.

OFF.”

LARGE: Waypoints are shown in actual mark shape

SMALL: Waypoints are displayed with an “x” regardless of mark shape
selected.

OFF: All waypoints are off except the waypoint destination and route.

5. Press the [MENU] key several times to close the menu.