Furuno GP-3500 User Manual
Page 153
10. RECORDING & PLAYING BACK DATA
10-3
3-5. FORMAT MEMORY CARD
FORMAT MEMORY CARD
1. YES
2. NO
SELECT "YES" BY TRACKBALL TO START THE FORMAT.
Format memory card menu
7. Press the [1] key to select “1. YES.”
The following message appears.
START FORMATTING
MEMORY CARD.
ARE YOU SURE?
YES ... PRESS KNOB
NO ... PRESS CLEAR KEY
8. Press the [ENTER] knob.
The message “NOW FORMATTING MEMORY CARD” appears. When the
formatting is completed, the message “FORMAT COMPLETED. PRESS KNOB
TO CONTINUE.” appears.
9. Press the [ENTER] knob.
Note: If you insert a mini chart card in the left slot, an error message
appears. After pressing the [ENTER] knob, insert a memory card and
then retry the formatting.
10. Press the [MENU] key several times to close the menu.
- MARINE RADAR 1953C (100 pages)
- GP-1650D (2 pages)
- GP-1650WD (96 pages)
- GP-1650W (96 pages)
- NAVNET 1943C-BB (92 pages)
- GD-3300 (137 pages)
- DUAL GPS GP-150-DUAL (130 pages)
- GP-1650WF (113 pages)
- CH-300 (124 pages)
- NX-300 (65 pages)
- NX-300 (2 pages)
- GP-1850WDF (115 pages)
- GP-1850WD (44 pages)
- GP-1850W (98 pages)
- GP-1850WD (98 pages)
- GP-1850W (4 pages)
- GP-1850W (98 pages)
- INTERFACE UNIT IF-2500 (12 pages)
- GP-31 (2 pages)
- GP-33 (98 pages)
- GP-7000 (28 pages)
- GP-7000 (2 pages)
- GP37 (2 pages)
- GP-90 (36 pages)
- CI-35 (69 pages)
- GP-1850DF (63 pages)
- GP-1850F (110 pages)
- GP-30 (2 pages)
- FCV-30 (110 pages)
- BACK GP-80 (103 pages)
- LC-90 MARK-II (2 pages)
- GP-1650W (44 pages)
- DD-80 (119 pages)
- RP-250 (73 pages)
- GP-1650 (94 pages)
- GP-185F (4 pages)
- GP-1600F (97 pages)
- GP-1850D (94 pages)
- GP-7000F (132 pages)
- GP-7000F (52 pages)
- GP-36 (81 pages)
- GP-150-DUAL (123 pages)
- GP-80 (37 pages)
- 1650WDF (4 pages)