Specifications, Furuno, Specifications of color gps plotter gp-3500 – Furuno GP-3500 User Manual
Page 190

FURUNO
GP-3500
SPECIFICATIONS OF COLOR GPS PLOTTER
GP-3500
1 DISPLAY
1.1
Display system
10.4-inch TFT color LCD
1.2
Effective area
158.4 (W) x 211.2 (H) mm
1.3
Display pixels
480 (H) x 640 (V) dots
1.4 Position
indication
Latitude/longitude or Loran C or A LOPS
1.5 Projection
Mercator
1.6
Usable area
85° latitude or below
1.7
Display mode
Plotter, Video pilot, NAV data
2 GPS
RECEIVER
2.1
Receiving channels
GPS: 12 channels, 12 satellite, parallel tracking
WAAS: 1 channel
2.2
Rx frequency
1575.42 MHz
2.3
Rx code
C/A code, WAAS
2.4
Position fixing system
All in view, 8-state Kalman filter
2.5
Position accuracy
GPS: 10 m approx., 95% of the time, 2 drms, HDOP
4
WAAS: 3m approx., 95% of the time, 2 drms
2.6
Tracking velocity
999 kt
2.7
Position-fixing time
Warm start: 12 s, Cold start: 90 s
2.8
Position update interval 1 s
3 PLOTTER
3.1
Effective projection area 0.125 nm to 6,144 nm (at equatorial area)
3.2
Track display
Plot interval: by time (1s to 99m 59s) or distance (0.01 to 9.99 nm)
3.3 Memory
capacity
Track and mark point:
16,000 points
Waypoint:
3,500 points with comment (QP 35 points)
Route:
200 routes and 1 simple route with 35 waypoints each
3.4 Alarms
Arrival
and
Anchor watch alarms
Cross track error and border alarms
Ship’s speed in and out alarms
3.5
Electronic chart card
FURUNO chart card or NAVIONICS chart card available
3.6 Information
display
Ship’s L/L position (Loran C/A or Decca TDs also available)
Date and Time, Ship’s speed, Chart scale, Waypoint L/L position,
Range and bearing to destination waypoint,
Cursor
intersection L/L position,
SP - 1
E4421S01C