Furuno GP-3500 - Manual (Page 158)

10. RECORDING & PLAYING BACK DATA
10-8
Note 1: To escape, press the [CLEAR] key instead of the [ENTER] knob.
Note 2: Loaded and current data are processed as follows:
Tracks: Since loaded track data is added to internal track, oldest track will be
erased when the track memory capacity is exceeded.
Waypoints & routes: The loaded data replaces data previously stored.
Marks and lines: The loaded data is added to internal data. When the mark/line
memory becomes full no marks may be entered.
Setting data: The loaded data replaces current configuration settings. If the
memory card is ejected while loading or data could not be loaded, push the
[ENTER] knob to restart. Note that track memory allocalion is not saved or
loaded. To use loaded setting data, turn the power off and on again.
10. Press the [ENTER] knob.
When loading SETTING DATA, the unit restarts automatically.
11. Press the [MENU] key several times to close the menu.
10.2.5 Deleting files
1. Insert a memory card into the left slot.
2. Press the [MENU] key to show the main menu.
3. Press the [3] key to show the MEMORY CARD OPERATIONS & DATA
TRANSFER menu.
4. Press the [4] key to select DELETE FILE IN MEMORY CARD menu.
3-4. DELETE FILE IN MEMORY CARD
FILE NAME
FILE 1
FILE 2
TURN KNOB TO SELECT FILE TO DELETE.
PRESS KNOB TO DELETE FILE.
Delete file in memory card menu
Note: When the memory card has no data, a beep sounds at step4.
5. Rotate the [ENTER] knob to select the file to delete, and then press the
[ENTER] knob.
DELETE FILE.
ARE YOU SURE?
YES ... PRESS KNOB
NO ... PRESS CLEAR KEY
6. Press the [ENTER] knob to delete file. To escape, press the [CLEAR] key.
7. Press the [MENU] key several times to close the menu.