Fluke 1529 Chub-E4 - Manual (Page 94)

• indicates numeric value is required.
• indicates a list of channel numbers is required.
• indicates a Boolean value (0 or 1) is required. The mneumonics
OFF and ON are also accepted for 0 and 1, respectively.
• indicates a conversion mnemoic is required.
• indicates a parameter name is required.
• indicates a serial number is required.
• indicates a resistance value is required.
• indicates a voltage value is required.
• indicates a temperature unit is required.
• indicates a password is required.
• indicates a port number is required.
• indicates an eight character label is required.
• indicates a four digit number is required.
• indicates a one or two digit number is required.
• indicates a one or two digit number is required.
• indicates a one or two digit number is required.
• indicates a one or two digit number is required.
• indicates a one or two digit number is required.
• indicates a valid baud number is required.
8.4.1 Measurement Commands
The measurement commands are used to read information on the statistical cal-
culations and for reading the most recent measurement for a specified channel.
The measurement commands are not password protected.
8.4.1.1 CALCulate:AVERage:CLEar
Clears the statistical functions for all channels.
CALC:AVER:CLE
The *RST command clears the statistical functions.
8.4.1.2 CALCulate:AVERage:DATA?
Returns the value of a statistical calculation for a given channel.
CALC3:AVER1:DATA?
0.017
1529 Chub-E4 Thermometer Readout
User’s Guide
88