FUJITSU MCJ3230AP - Manual (Page 179)

C156-E205-01EN 6-1
CHAPTER 6 Diagnosis and Maintenance
This chapter contains diagnosis and maintenance information.
6.1 Diagnosis
Table 6.1 shows a test executed by the diagnostic function.
The drive has a self-diagnostic function. This function can check the basic
operations of the drive.
A test program running in the host system is required to check general operations,
including operations of the interface with the host system. (See Subsection 6.1.3.)
Table 6.1 Self-diagnostic function
Diagnostic contents Target
Initial self diagnosis Basic operation
(hardware function test)
Diagnostic command Basic operation
Test program General operation
6.1 Diagnosis
6.2 Maintenance Information