Important alert items, Important alert messages – FUJITSU MCJ3230AP User Manual
Page 10
C156-E205-01EN
v
Important Alert Items
Important Alert Messages
The important alert messages in this manual are as follows:
A hazardous situation could result in minor or moderate personal
injury if the user does not perform the procedure correctly. Also,
damage to the product or other property, may occur if the user does not
perform the procedure correctly.
Task
Alert message
Page
Operation
Low temperature burns:
The surface temperatures of
some ICs on the printed circuit board unit in the optical disk
drive exceed 55°C while operating. Be careful of low
tenperature burns.
3-1
Installation
Device damage:
1)
Shock or vibration applied to the drive that exceeds the
values defined in the standard damage the drive. Use
care when unpacking.
2)
Do not leave the drive in dirty or contaminated
environments.
3)
Since static discharge may destroy the CMOS devices in
the drive, pay attention to the following points after
unpacking:
"
Use an antistatic mat and wrist strap when handling
the drive.
"
Hold the mounting frame when handling the
drive. Do not touch the PCA except when setting
the switches.
4)
When handling the drive, hold both sides of the
mounting frame. When touching other than both sides of
the mounting frame, avoid putting force.
5)
Do not forcibly push up the end of the header pin of the
printed circuit board unit when handling or setting the
drive.
3-18