FUJITSU MCJ3230AP User Manual

Page 11

Important Alert Items

C156-E205-01EN

Task

Alert message

Page

Installation

Device Damage:

Be sure to turn on the power supply

before inserting your cartridge for the first time. It releases
the device from transport protection and enables you to insert
the cartridge.

The device may be damaged if you insert the cartridge
without releasing the protection. From the next time, you
don't need to turn on the power supply beforehand.

Before moving the drive, remove the optical disk cartridge. If
the drive is moved with the optical disk cartridge loaded in it,
the head may move back and forth in the drive to damage the
head or disk and reading the data may fail.

3-19

Make sure that the system power is off.

Do not connect or disconnect any cable when the power
is on.

3-22

Device Damage:

Before demounting the optical disk drive,

turn off the system power. Do not remove screws securing
the cables and drive when the power is on.

3-23

Cleaning cartridge

Device Damage:

Be sure to use the dedicated head cleaner

described above.

5-6

Damage for disk medium:

Use the cleaning solution and

cleaning cloth specified in Table 5.2. If other than the
specified items is used, disk media surface may be damaged.

Damage for date medium:

Do not use this cleaning kit

for the floppy disk or the optical disk cartridge used for other
optical disk drive.

5-12

Damage for disk medium:

Clean the cartridge at clean

place. Put a disposable groves at cleaning so that the
fingerprint does not put on the disk media (recommendation).

5-12

Damage for disk medium:

At setting the cartridge to the

setting case, do not apply the heavy shock and push hardly.

Eye inflammation:

In case of contact with eyes,

immediately flush eyes with water.

5-13

5-14

Maintenance and Repair

Data loss:

In case of regular repair, the optical disk

cartridge should not be attached except where the cartridge
causes the error. And before having the drive repaired, save
the data in the cartridge. Fujitsu is not responsible for data
last during maintenance or repair.

6-3