FUJITSU DESKPOWER 2000 - Manual (Page 44)

32
• Wake-Up by PCI Card
This will enable the system to wake up through PCI Card peripheral.
The settings are : Enabled and Disabled.
• Power on by Ring
This item allows system to enabled/disabled to power on by ring signal of a
modem.
The settings are: Enabled and Disabled.
• Wake-Up on LAN
To use this function, you need a LAN add-on card which suppor t power on
functions. It should also suppor t the wake-up on LAN jumper (JWOL1).
• USB KB Wake-Up From S3
This item allows system to enabled/disabled to wake up from S3 (ACPI) by
USB keyboard.
The settings are: Enabled and Disabled.
• CPU Thermal-Throttling
Select the CPU THRM-Throttling rate. The settings are: 12.5%, 25.0%, 37.5%,
50.0%, 62.5%, 75.0%, 87.5%.
• Resume by Alarm
This function is for setting date and time for your computer to boot up. During
Disabled, you cannot use this function. During Enabled, choose the Date and
Time Alarm:
Note: If you have change the setting, you must let the system boot up until it goes
to the operating system, before this function will work.
Enabled Wake up on LAN suppor ted.
Disabled Wake up on LAN not supported.
Date(of month) Alarm You can choose which month the system will
boot up. Set to 0, to boot ever y day.
Time(hh:mm:ss) Alarm You can choose what hour, minute and second
the system will boot up.
She_Chp2_14-38 11/3/00, 11:05 32