FUJITSU DESKPOWER 2000 - Manual (Page 14)

2
INTRODUCTION
The DESKPOWER 2000 is a high-per formance computer based on Intel ® 810
chipset. The board is designed for the Intel ® Pentium III (FC-PGA) and
Celeron TM (PPGA) processor for inexpensive business/personal desktop markets.
The Intel ® 810 chipset is the first generation Integrated Graphics chipset for the
Intel ® Pentium III and Celeron processor. The graphics accelerator architecture
consists of dedicated multi-media engines executing in parallel to deliver high
per formance 3D, 2D, and motion compensation video capabilities. An integrated
centralized memor y arbiter allocates memory bandwidth to multiple system
agents to optimize system memory utilization. A new chipset component
interconnect, the hub inter face, is designed into the Intel 810 chipset to provide
an efficient communication channel between the memor y controller hub and I/O
hub controller.
The Intel ® 810 chipset contains three core components: the Graphics and Memory
Controller Hub (GMCH/GMCH0), the I/O Controller Hub (ICH0/ICH) and the
Firmware Hub (FWH). The GMCH integrates a 66/100MHz, P6 family system bus
controller, integrates 2D/3D graphics accelerator, 100MHz SDRAM controller and
high-speed hub interface for communication with the ICH0/ICH. The ICH0/ICH
integrates an Ultra ATA/33(ICH0) controller, USB host controller, LPC inter face
controller, FWH inter face controller, PCI inter face controller, AC’97 digital
controller and a hub inter face for communication with the GMCH/GMCH0.
The Intel ® 82802 Firmware Hub (FWH) component is part of the Intel ® 810 chipset.
The FWH is key to enabling future security and manageability infrastructure for the
PC platform.
She_Chp1_01-10 11/3/00, 11:05 2