FUJITSU DESKPOWER 2000 - Manual (Page 42)

30
• IPCA Function
This item allows you to enabled/disabled the Advanced Configuration And
Power Management (ACPI).
The settings are: Enabled and Disabled.
• ACPI Suspend Type
Setting of Suspend Type at ACPI.
The settings are: S1 (POS) AND S3 (STR).
• Power Management
This categor y allows you to select the type (or degree) of power saving and is
directly related to the following modes:
1. Suspend Mode
2. HDD Power Down
There are three selections for Power Management, two of which have fixed
mode settings.
2.8 POWER MANAGEMENT SETUP
The Power Management Setup allows you to configure you system to most
effectively save energy while operating in a manner consistent with your own style
of computer use.
CMOS Setup Utility - Copyright(C) 1984-1999 Award Software
Power Management Setup
Item Help
Menu Level >
Figure 2-6: Power Management Setup menu
IPCA Function Enabled
ACPI Suspend Type Si(pos)
Power Management User Define
Video Off Method DPMS
Video Off In Suspend Yes
Suspend Type Stop Grant
Modem Use IRQ 3
Suspend Mode Disabled
HDD Power Down Disabled
Soft-Off by PWRBTN Instant-Off
Wake-Up by PCI Card Disabled
Power On by Ring Disabled
Wake-Up on LAN Disabled
USB KB Wake-Up From S3 Disabled
CPU Thermal-Throtting 62.57%
Resume By Alarm Disabled
**Reload Global Timer Events**
Primary IDE 0
Disabled
Primary IDE 1 Disabled
Secondary IDE 0 Disabled
Secondary IDE 1 Disabled
FDD, COM, LPT Port Disabled
PCI PIRQ[A-D]# Disabled
↑ ↓ → ←
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-safe defaults F7:Optimized defaults
She_Chp2_14-38 11/3/00, 11:05 30