HP DL785 - Manual (Page 65)

system attributes. The System Insight Display LEDs identify components experiencing an error,
event, or failure.
CAUTION: Do not block airflow by pushing the SID flush against the server while it is in the
down position.
IMPORTANT: When removing the access panel to view the Systems Insight Display LEDs, leave
the server powered on. The Systems Insight Display LEDs are cleared when the server is powered
off.
NOTE: The system management driver must be installed for the internal system health LED
to provide pre-failure and warranty conditions.
Component LED
System power POWER
Internal component health INT HEALTH
External component health EXT HEALTH
Over temperature TEMP
Fan FAN X
Power supply PS X
I/O backplane power IO BOARD
SPI board power SPI BRD
SPI board not fully seated into the I/O backplane SPI ILK
I/O backplane not fully seated into the midplane board MP INTERLOCK
Processor memory board cell 8 (boot CPU) not fully seated into the midplane
board CPU INTERLOCK
DIMM slot PROCESSOR/MEMORY BOARD X
DIMM 1A-8D
System Insight Display LEDs 65