HP DL785 - Manual (Page 26)

NOTE: The release latches will lock into place when the rails are fully extended.
WARNING! To reduce the risk of personal injury, be careful when pressing the server
rail-release latches and sliding the server into the rack. The sliding rails could pinch your
fingers.
3. After performing the installation or maintenance procedure, slide the server into the rack
by pressing the server rail-release latches.
Removing the server from the rack
To remove the server from an HP, Compaq branded, telco, or third-party rack:
1.
Power down the server, see “Power down the server” (page 25) .
2. Disconnect the cabling from the server.
3. Extend the server from the rack, see “Extending the server from the rack” (page 25) .
4. Remove the server from the rack. For more information, refer to the documentation that
ships with the rack mounting option.
26 Removal and replacement procedures