HP zl - Manual (Page 23)

hp toptools for openview nnm user guide
# ./install
HP Openview Network Node Manager Version 6.20 installed
********************************************************************
Welcome to HP TopTools 5.6 for Openview NNM-UX (A.05.05.00)(Local) Installation.
You are about to install the HP TopTools 5.6 for
OpenView NNM-UX (A.05.05.00) (Local).
Make sure all NNM consoles, including the manager console
and the remote consoles are closed before beginning the
installation.
Warning!
********
Performing the installation without closing all the
OpenView consoles including the remote consoles will result in
malfunction of NNM.
Please enter the TopTools Server address[IP]:15.27.244.37
Please enter the Server port:5032
This installation will execute ovstop, ok to continue?(Y/N):y
WARNING: DO NOT use the kill command or Control-C to get out of this
installation.
If you want to closely track the progress of the installation,
open another terminal window and type the command:
tail -f /tmp/hpttBrdgInstall.log
Notes and warnings will be written to this log as well as
indications of the installation's progress.
This installation will take at least 15-30 minutes to complete. Please wait....
.
.
.
.
.
.
Mibs are loaded successfully
*******************************************************************
* Your installation was successful. *
* *
* Review the notes and warnings from this installation *
* that are recorded in the log file(/tmp/hpttBrdgInstall.log) *
* *
* Please make sure that hpttBrdgDisc finishes discovering *
* all HP devices, then bring up ovw. *
*******************************************************************
Figure 3-1. HP UX or Solaris Installation Script.
Page 23