BenQ ZOWIE XL2731K 27" 16:9 165 Hz TN Gaming Monitor - Manual (Page 58)

58
Other
Setting
Resolution
Notice
Sets whether to display the resolution notice of the
recommended resolution when a new input source
is detected by the monitor
• ON
• OFF
Buzzer Turns the tone of control keys on or off. • ON
• OFF
Input Auto
Switch
Sets to automatically detect the available input
source.
• ON
• OFF
Auto
Power Off
Sets the time to power off the monitor
automatically in power saving mode.
• OFF
• 10 min
• 20 min
• 30 min
LED
Indicator
Determines the brightness of the LED indicator. • ON
• OFF
DDC/CI Allows the monitor settings to be set through the
software on the PC.
DDC/CI, short for Display Data Channel/Command
Interface, which was developed by Video Electronics
Standards Association (VESA). DDC/CI capability allows
monitor controls to be sent via the software for remote
diagnostics.
• ON
• OFF
Reset Mode Resets the current or all picture modes.
Current
Mode
Resets the current picture mode.
If the current mode is
Gamer1 / Gamer2 /
Gamer3 and an S Switch is connected to the
monitor, the same mode on both the monitor and
S Switch will be reset.
All Modes Resets all picture modes.
If an S Switch is connected to your monitor while
performing this operation, the game mode settings
saved on S Switch will be reset as well.
Reset All Resets all mode, color and geometry settings to the factory default
values.
If an S Switch is connected to your monitor while performing this
operation, the game mode settings saved on S Switch will be reset as well.
Unplug the S Switch first if you wish to keep the game mode settings on it.
• YES
• NO
Item Function Range