Working with the food processor – Silvercrest SKM 500 B1 User Manual
Page 18

15
SKM 500 B1
GB
Working with the food processor
You can shred, grate or cut using the three disks 0 q w of the food processor.
1) Select the required disk and assemble everything as described in the chapter
“Assembly”.
2) Remove the pusher 1 from the fi lling shaft 2.
3) Cut the food into pieces that will easily fi t into the fi lling shaft 2.
4) Start the food processor at setting 1 by turning the speed regulator p.
5) Then gradually add the food. Push the food in using the pusher 1 without
applying pressure.
Do not exceed the quantities specifi ed in the following table.
INGREDIENT
SHREDDING DISK
CUTTING DISK
GRATING DISK
Apples/carrots
max. 500 g
max. 500 g
-
Parmesan
max. 200 g
-
max. 200 g
Cucumber
-
max. 2
-
Potatoes
max. 500 g
max. 500 g
max. 500 g
Onions
-
max. 300 g
-
Chocolate
-
-
max. 200 g
Hard cheese
(e.g. mature
Gouda)
max. 300 g
-
-
NOTE
►
Do not prepare large quantities all at once, but in several portions. Empty
the mixing bowl u each time.
►
Do not allow the appliance to operate for long periods when chopping
(hard) cheese or chocolate. Otherwise the ingredients will become too hot,
start to melt and agglutinate.
IB_103418_SKM500B1_LB4.indb 15
17.10.14 14:37