Quintum Technologies Tenor AX - Manual (Page 75)

5-6 P/N 480-0062-00-10
Chapter 5: Advanced Topic: Diagnostics/Maintenance
Display all Alarms
You are able to display both active alarms and an alarm history as follows:
1. Through CLI, access the Monitor prompt.
2. Type alarm. Both active alarms and the alarm history will be displayed. See section Valid Alarms
for field definitions.
Figure 5-1 Alarm sample
Informational Glare occurred An incoming and outgoing call went through at the same
time, and the remote end call did not back off, but the
situation was corrected.
Severity
(appears as
part of severity
field)
Alarm Description
(text appears in desc field)
Definition
IP# Sequence#Type#Severity# Desc# Slot# Device# Analog Interface# Channel# Date/Time
192.166.28.230:944:ALR:3:Border Element connection lost:0:0:0:0:TUE OCT 14 14:05:27 2003
192.166.28.230:946:RPT:4:Gatekeeper status (Gatekeeper(0.0.0.0) removed):0:0:0:0:TUE OCT
14 14:05:27 2003
192.166.28.230:947:CLR:3:Border Element connection lost:0:0:0:0:TUE OCT 14 14:05:27 2003