Quintum Technologies Tenor AX - Manual (Page 109)

P/N 480-0062-00-10 6-29
Chapter 6: Advanced Topic: SNMP/IVR
ANI Authentication Application Type 1 - Call Flow
ANI Authentication Application Type 1 enables calling subscribers to receive authentication based
on the calling number. If you configure the ivrtype to 4 (ANI Type 1), when an incoming call comes
in, the call will be authenticated with ANI by a RADIUS server.
Figure 6-7 is a diagram of the call flow for ANI Authentication Application Type 1, which details
the messages transmitted between the following components:
Calling Party. The originating caller using a pre-paid calling card.
ANI AUTH Enabled Tenor AX. The Tenor AX which enables the ANI authentication functions.
RADIUS Server. Remote Authentication Dial-In User Service for authenticating with ANI the call-
ing number.
Called Party. The destination called party.