Quintum Technologies Tenor AX - Manual (Page 12)

P/N 480-0062-00-10 1-3
Chapter 1: Overview
Table 2-1 Tenor AX Configuration Types
The MultiPath version’s architecture enables the Tenor AX to intelligently route calls between the
FXS, FXO, and the VoIP network to achieve the best combination of cost and quality. The Tenor AX
also routes calls over IP to reduce costs, and then transparently “hop off” to the PSTN, to reach off-
net locations. Calls can be routed in any direction between any of the ports.
Whichever configuration you choose, the high performance unit provides one 10/100 BaseT con-
nection, along with one RS-232 serial console port connection. The unit also incorporates an intelli-
gent call routing engine which regulates system resources and configuration while coordinating all
voice traffic activity in the unit.
The unit’s simple plug and play embedded system architecture brings VoIP technology to your net-
work without changing your existing telephony infrastructure. Your network stays as is, and the call
type is transparent to the user. This technology boasts superior voice quality without compromising
reliability.
Series Configuration FXS Ports FXOPorts VoIP Ports
AXM MultiPath
AXM0800 8 8 8
AXM1600 16 16 16
AXM2400 24 24 24
AXT Trunking VoIP Gateways
AXT0800 0 8 8
AXT1600 0 16 16
AXT2400 0 24 24
AXG Series Gateway
AXG0800 8 0 8
AXG1600 16 0 16
AXG2400 24 0 24
AXE Enterprise VoIP Gateway
AXE0800 8 2 8
AXE1600 16 2 16
AXE2400 24 2 24