Quintum Technologies Tenor AX - Manual (Page 35)

P/N 480-0062-00-10 2-11
Chapter 2: Hardware Components
Specifications
Voice/Fax
Call Routing: FXO/FXS/IP
Voice Algorithms: G.723.1A (5.3, 6.3 Kbps), G.726 (16, 24, 32, 40 Kbps), G.729A, G711
Fax Support: Group III at 2.4, 4.8, 7.2, 9.6, 12, 14.4 Kbps
Automatic Call Detection:Voice/Modem/Fax
PSTN/PBX Connections
Interface: Analog, FXO Interface (PSTN side), FXS Interface (PBX side)
Connector: 50-PIN Telco
Ringing Voltage: Adjustable/Country-specific
Ringing Cadence: Adjustable/Country-specific
Maximum Loop Current: 24 mA
Ringer Equivalence Number:3 up to 1000 feet of 24 AWG or heavier
Ringing Frequency: Adjustable/Country-specific
LAN Connection
LAN Support: 10/100 Mbps Ethernet
Connection Type: Autosensing of speed and duplex
Physical
Position: 19” (48.7 cm) rack mountable, desktop stackable, wall-mountable
Depth: 10 3/4” (27.6 cm)
Length: 17 3/8” (44.5 cm)
Height: 1 3/4” (4.5 cm)
Weight: 10 lbs (4.55 kg)
Electrical
Ethernet: Standard 10/100Base-T RJ-45 interface (IEEE 802.3)
Connectors: 50-pin Telco Connector for FXO connection
50-Pin Telco Connector for FXS connection
Console Port: RS-232/DB-9 Female
Power: AC Power at 100-240 volts and 50-60 Hz, 70 Watts max
Environmental
Operating Temperature: 40° to 104 °F (5°-40° C)
Operating Humidity: 20% to 80% non-condensing
Altitude: -200 to 10,000 feet, or -60 to 3,000 meters
Storage Temperature: 14° to 140° F, or -10° to 60° C