Quintum Technologies Tenor AX - Manual (Page 37)

3-2 P/N 480-0062-00-10
Chapter 3: Installation/Basic Troubleshooting
Installation
Before you begin the actual installation, review the pre-installation guidelines which follow and
inspect the package contents.
Pre-Installation Guidelines
• Always use an anti-static wrist strap when handling the unit.
• Do not open the unit cover. Inside parts have hazardous voltages and are extremely sensitive to
static. If the unit has been opened, our warranty is void.
• Do not connect equipment in wet conditions and keep away from dusty areas.
• The area must not exceed the temperature and humidity guidelines outlined in Chapter 2: Hard-
ware Components .
• Avoid exposing the unit to excessive vibrations.
• Ensure no equipment is put on top of the unit.
• Ensure there is clearance between the fan intake/exhaust on the side of the unit to avoid airflow
being blocked.
Inspect Package Contents
Before you install the hardware, ensure the following components are included in our shipment:
• Tenor AX and Mounting Hardware
• 1 AC Power Cable
• 1 DB-9 RS-232 Serial Cable
• RJ-45 Cable
• Product Guide in CD format
If a listed component is not included in your package, contact your customer service representative.