Brother FAX-220 - Manual (Page 63)

53
C. Delayed Polling
To set the unit into the Delayed Polling Mode start in the FUNCTION MODE by pressing
FUNCTION without a document in the feeder.
1. Press "3". Your unit goes into a POLLING REQUEST MODE. The LCD will
display:
MSG CTR
— AUTO ANS
''-PASSWORD
4.
5.
6 .
7.
POLLING:OFF
2. Use the cursor keys to select simple polling. The LCD will display:
MSG CTR
— AUTO ANS
PASSWORD
POLLING:STD
3. Press SET. The LCD will display:
DELAY: Q 00:00
. MSG CTR
AUTO ANS
■PASSWORD
FAX:
Input the time at which delayed polling is to take place.
The setting procedure is the same as Delayed Transmission (p.45)
Press START. The LCD will request the fax number to be polled and display:
MSG CTR
— AUTO ANS
PASSWORD
Input the numbers using the ten key pad. To dial manually, press MAN.DIAL
first.
Press START and the unit is ready to poll at the specified time. The LCD will
display:
MSG CTR
— AUTO ANS
''-PASSWORD
NOTE 1: Only manual transmission (see p. 12) and normal reception are possible while
the unit is waiting for the right time to start polling. Automatic transmission
cannot be used.
DELAY WAITING
NOTE 2: While waiting for polling, Automatic Paging function does not work.