Brother FAX-220 - Manual (Page 19)

Operation of the control buttons and switches
START/COPY button
COPY
START
Initiates facsimile transmission or copy operation.
STOP button
TEN KEY PAD -
1 2 ABC 3 def
POLL ttPGS
4 GHI 5 Q MNO
COVERPAGE MSG CTR
7 PRS 8 Q WXY
o O
Q OPER tt
LCD -
MSG CTR
— AUTO ANS
PASSWORD
HOOK CONTROL -
Stops any of confirming programming in the FUNCTION
SETTING mode.
Stops copying; stops document transmission (but cannot
stop reception or phone calls):
Stops continuous beeping in ERROR;
Confirms the elimination of abnormality (e.g., you press the
STOP button after you change the paper roll).
Initial function - one touch calling buttons (0 - 9).
Regular telephone dialing keys only after you press the
MAN.
DIAL button for manual dialing.
Used for registering certain items into the unit (one-touch,
speed-dial, etc.)
The * and # keys control the cursor movement left and right,
respectively, during certain programming operations. # is also
used for speed dialing.
Displays date and time in the standby mode.
Displays prompts during programming and operational
activities of the unit.
Displays results of various operations and indicates
problems/errors.
Up to 16 digits can be displayed at a time. When information
contains more than 16 digits, you can press the cursor key to
scroll the display (in the direction indicated by the cursor)
Pressing this button allows dialing with the handset still in
ON HOOK status and activates the monitor so that the
operation of the machine may be heard. The monitoring
sound will not be heard from the speaker during dialing when
you are in on-hook status.
Pressing the HOOK button again in the ON-HOOK status
turns off the line.
Removing the handset from the cradle (off-hooking) while
the HOOK button is still engaged, stops the monitoring
activity of the speaker and allows you to make a phone call
using the handset. During the handset-originated telephone
call, the
HOOK button will not be activated, even if pressed.
FUNCTION/PAUSE -
¡FUNCTION \
PAUSE
The FUNCTION button in programming (this is its initial and
major usage).
The PAUSE button inserts a delay in the dialing process. This
function can operate only during:
- Manual dialing in automatic transmission mode
- Registration for programmed transmission.
When the PAUSE button is pressed, the LCD displays the
letter "P".