Brother FAX-220 User Manual

Page 49

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Here the LCD initially displays:

CALL MSG:ERASE

. MSG CTR

AUTO ANS

■PASSWORD

Pressing START/COPY puts the unit into an erase mode and the LCD displays:

MSG CTR

CALL MSG:ERASED

- AUTO ANS
-PASSWORD

Press STOP or simply wait 2 seconds. The LCD will display:

- MSG CTR

CALL MSG:RECORD

PAGING:OFF

MSG CTR(1-8)?

- AUTO ANS
-PASSWORD

NOTE:

When the CALL MESSAGE is erased, the AUTO PAGE FUNCTION is automatically

turned OFF. If you are going to record a new CALL MESSAGE, be sure to turn ON
the AUTO PAGING again.

• If you wish to go on to the next operation (see #6 below), press

NEXT

and the LCD

will display:

- MSG CTR
- AUTO ANS
-PASSWORD

Press

SET

and the LCD will revert to:

- MSG CTR
- AUTO ANS
-PASSWORD

Automatic Paging ON/OFF

Now that the AUTO PAGING is turned ON, your unit will give you a call to inform that

there is a recorded phone call.

IMPORTANT: You have to program CALL TEL number before setting AUTO

PAGiNG function (see beiow 8).

After you've accessed this function by pressing "6", the LCD will display:

- MSG CTR
- AUTO ANS
-PASSWORD

Use the cursor keys to turn this function

ON.

The LCD will display:

- MSG CTR
- AUTO ANS
-PASSWORD

PAGING:OFF

PAGING:ON

If you wish to go on to the next operation (see #7 below), press NEXT and the LCD

will display:

- MSG CTR
- AUTO ANS
-PASSWORD

MSG CTR CODE: aO