Brother FAX-220 - Manual (Page 46)

36
OGM:PLAYING
Press START/COPY to play the OGM. The LCD will show:
P- MSG CTR
— AUTO ANS
^PASSWORD
After listening, press STOP or after the selected OGM time is completed, the display
will revert to:
P- MSG CTR
— AUTO ANS
^PASSWORD
If you wish to go on to the next function (see #4 below), press NEXT and the LCD
will display:
[_ MSG CTR
— AUTO ANS
^PASSWORD
OGM:PLAY
ICM#:6
OGM:ERASED
OGM:RECORD
ICM#:6
(c) When you are in the OGM ERASE MODE,
Press START/COPY to erase the OGM. The LCD will show:
j_ MSG CTR
— AUTO ANS
"•-PASSWORD
After 2 seconds, the display will revert to:
^ MSG CTR
— AUTO ANS
•-PASSWORD
If you wish to go on to the next function, press NEXT and the LCD will display:
i_ MSG CTR
— AUTO ANS
•-PASSWORD
NOTE: When the OGM is erased MSG CTR MODE (see p. 28) is automatically turned OFF.
4 Number of Incoming Messages that can be recorded
Selecting the Incoming Message (ICM) number automatically determines the amount of
time available for each message. The more messages, the less time per message. You
have approximately 2 minutes of OGM/ICM/MEMO capacity. This can be used for 3
to 6 messages. Furthermore, the longer the Outgoing Message the shorter the total
amount of time available for ICM (for instance, if you have a 16 second OGM, you
have only 107 seconds). The selection of the numbers is done as follows:
• If you are doing this before any of the above-described operations, you start with the
LCD displaying:
MSG CTR
— AUTO ANS
•-PASSWORD MSG CTR(1-8)?
Press "4". The LCD will display:
ICM#:6
MSG CTR
AUTO ANS
■PASSWORD