Brother FAX-220 - Manual (Page 42)

This LCD display means that the memory is full and you have to erase ICM before recording your
MEMO.
Let's listen to ICMs first. Press NEXT.
MSG CTR
— AUTO ANS
PASSWORD
32
PLAY ERS FWD
Press PLAY. You will hear the ICMs.
Suppose that you received three ICMs, and that you want your husband to listen to only the second
ICM and your MEMO. Then you have to erase the first and third ICMs. To do that, press
PLAY
again. While the first ICM is played, press ERASE. And press ERASE during the third ICM.
Now, you can record your MEMO for your husband. With the following display, press either cursor
key.
MSG CTR
AUTO ANS
PASSWORD
The display will change to.
Press START/COPY,
. MSG CTR
AUTO ANS
■PASSWORD
MSG CTR
AUTO ANS
•PASSWORD
Speak into the microphone for example, "Sorry, I will see you at 6:30". Please refer to p.42 for the
MEMO length.
When you finish, press STOP. The LCD will show.
MEMO:RECORDED
MSG CTR
AUTO ANS
■PASSWORD
After 2 seconds, the display will revert to:
MEMO:RECORD
MSG CTR
— AUTO ANS
T-PASSWORD
If you want to check your MEMO, press either cursor key. The LCD will change to "PLAY ERS FWD",
and press PLAY. You will hear the second ICM and your MEMO. If it is OK, press SET. The LCD
will change,
P- MSG CTR
— AUTO ANS
PASSWORD
To return to the standby mode, press SET twice.
If you do not have to check your MEMO, just press SET three times to return to the standby mode,
with the " MEMO:RECORD" display.
MSG:RECORDED
Now, your husband can reach your MEMO using the REMOTE OPERATION function.