Brother FAX-220 - Manual (Page 40)

30
To clear the Message Center memory of all incoming messages and MEMOS, press
PAUSE and REDIAL simultaneously.
Then press SET. The display will change to,
P- MSG CTR
— AUTO ANS
^PASSWORD
Press SET to return to the original LCD display:
r- MSG CTR
NO MESSAGE
MSG RECORDED AUTO ANS
■PASSWORD
Let's take an example.
Suppose that two ICMs came in while you were out.
Press FUNCTION and "9". The LCD shows.
MSG RECORDED
. MSG CTR
• AUTO ANS
■PASSWORD
Press NEXT. The LCD changes to:
PLAY ERS FWD
MSG CTR
— AUTO ANS
^PASSWORD
Press PLAY (HOOK). The first message is heard from the monitor. If you leave the
unit as it is, the second message will follow. If you press PLAY again during the
playback of a message, the message will be repeated from the beginning.
To erase a message, press ERASE(PAUSE) during the playback of the message.
Pressing FORWARD stops the playback of a message, and skips to the next message.
2. The MEMO Function
The MEMO function records messages directly through the built-in microphone. The
unit provides you with an ability to record a voice memo which can be used by you as a
memory-jogger or be accessed by a member of your family or co-worker when you are
out.
Start with the LCD displaying:
MSG RECORDED
or
NO MESSAGE
Press NEXT. The LCD will display:
PLAY ERASE FWD
. MSG CTR
AUTO ANS
■PASSWORD
MSG CTR
AUTO ANS
■PASSWORD
MSG CTR
AUTO ANS
■PASSWORD