Brother FAX-220 - Manual (Page 44)

34
£.
1
EXPLANATION
Outgoing Message length selection
The length for the Outgoing Message (OGM) is 8, 12 or 16 seconds. When you press
"1", the LCD displays:
^ MSG CTR
OGM TIME:08 AUTO ANS
•PASSWORD
Use the cursor to select the desired OGM length, i.e., 8, 12 or 16. Input by telephone
ten key is ngi accepted. The longer the OGM, the less time Is available for the
Incoming Messages!
If you press NEXT, the OGM time selection will be registered and the LCD will
prompt you to the next function (see #2 below):
MSG CTR
OGM/MEMO:STD
MSG CTR(1-8)?
— AUTO ANS
^PASSWORD
If you press SET instead of NEXT the selected OGM time will also be registered and
the LCD reverts to the original:
MSG CTR
— AUTO ANS
^PASSWORD
IMPORTANT: Time for OGM cannot be changed when any iCM/MEMO is
recorded.
Sound quality selection
You can vary the voice quality of the Message Center OGM/MEMO. The LCD
displays:
MSG CTR
OGM/MEMO:STD AUTO ANS
■PASSWORD
or, the enhanced voice quality:
OGM/MEMO:ENHST
_ MSG CTR
- AUTO ANS
-PASSWORD
Use the cursor to select the desired voice quality.
NOTE 1: If you select ENHANCED voice quality, you will cut down on the
available ICM time.
NOTE 2: Voice quality cannot be changed when any ICM/MEMO Is recorded.
If you press NEXT, the voice quality selection will also be registered and the LCD will
prompt you to the next function (see #3 below):
- MSG CTR
OGM:RECORD — AUTO ANS
^PASSWORD
Press SET to register the selected voice quality and the LCD reverts to:
MSG CTR
MSG CTR(1-8)? AUTO ANS
•PASSWORD