Baseline Systems FreeWave Ethernet Radio - Manual (Page 66)

FGR2-PE Wirelss Data Transceiver
LUM0024AB Rev A
In a MultiPoint Gateway radio, selecting multicast causes the transceiver to act as
an IP Multicast Sender on the Multicast address and port.
Utilize For Alarm
Web Parameter: Enable Alarm Client check box on the Serial Setup configuration Web page.
Network Type: Both
Default Setting: Disabled
Options: Disabled, Enabled
Description: Enabling the Utilize For Alarm parameter enables the port as an alarm client.
The transceiver acts as a terminal server on the port specified in the Port field.
If there is no current TCP connection to this port and serial data is received on
the local serial port, the transceiver becomes a client and makes a connection
to the IP address and port number specified in the Alarm IP & Port field.
For more information about setting up the alarm client, see "Using the Serial
Port as an Alarm Client" on page 41.
50