Version 2.21, Version 2.20 – Baseline Systems FreeWave Ethernet Radio User Manual
Page 124
FGR2-PE Wirelss Data Transceiver
LUM0024AB Rev A
FreeWave now supports only the following versions:
l
SSLv3 256 bits AES256-SHA
l
SSLv3 128 bits AES128-SHA
l
SSLv3 168 bits DES-CBC3-SHA
l
SSLv3 128 bits RC4-SHA
l
SSLv3 128 bits RC4-MD5
l
TLSv1 256 bits AES256-SHA
l
TLSv1 128 bits AES128-SHA
l
TLSv1 168 bits DES-CBC3-SHA
l
TLSv1 128 bits RC4-SHA
l
TLSv1 128 bits RC4-MD5
With the addition of the Users page, you can now define who can edit the settings on the
transceiver. Setting users up on this page can affect whether they can save settings through
Tool Suite and the Web pages.
Known Limitations:
l
Modem Stats require a radio link to be accurate.
l
Master Tx Beacon is not supported on a setting higher than 1 in MultiPoint networks
with repeaters.
Version 2.21
Release Date: 11/03/2010
Additions/Updates:
l
Fixed hardware and boot version on Web page.
l
The Tools page can now be viewed in Internet Explorer.
l
Fixed VLAN for Redundant Master Systems (RMS). To use VLAN with an RMS, both
the RMS and all Endpoints must be running firmware version 2.21 or higher.
Known Limitations:
l
Modem Stats require a radio link to be accurate.
l
Master Tx Beacon is not supported on a setting higher than 1 in MultiPoint networks
with repeaters.
Version 2.20
Release Date:11/03/2010
Additions/Update:
l
Revamped web interface.
l
Added capability for remote programming using Tool Suite.
108