Baseline Systems FreeWave Ethernet Radio - Manual (Page 3)

This product is licensed by The United States. Diversion contrary to U.S. law is prohibited. Shipment or re-
export of this product outside of The United States may require authorization by the U.S. Bureau of Export
Administration. Please contact FreeWave Technologies, Inc. for assistance and further information.
UL Specifications
The FGR2-PE transceiver is suitable for use in Class I, Division 2, Groups A, B, C, and D or non-hazardous
locations only.
Warning! Explosion Hazard! Substitution of components may impair suitability for Class I,
Division 2.
The diagnostics port and cable do not have a latching connector and cannot be used in a hazardous location.
Important: UL approved devices must be connected to a Class 2 power source.
LUM0024AB Rev A iii