Vswr alarm enable, Voltage alarm above, Voltage alarm below – Baseline Systems FreeWave Ethernet Radio User Manual
Page 100: Voltage alarm enable
FGR2-PE Wirelss Data Transceiver
LUM0024AB Rev A
VSWR Alarm Enable
Web Parameter:
Reflected Power Enable check box in the SNMP Trap Limits section of the
SNMP page.
Network Type:
Both
Default Setting:
Disabled
Options:
Disabled, Enabled
Description:
Enables a trap for the reflected power of the transceiver. The trap condition is
present based on the settings in the VSWR Alarm Above parameter.
Voltage Alarm Above
Web Parameter:
Voltage Alarm Above in the SNMP Trap Limits section of the SNMP page.
Network Type:
Both
Default Setting:
30
Options:
Any whole number between 6 and 30.
Description:
If the Voltage Alarm Enable option is set to Enabled, a trap condition occurs
if the voltage goes above the value in this parameter.
Voltage Alarm Below
Web Parameter:
Voltage Alarm Below in the SNMP Trap Limits section of the SNMP page.
Network Type:
Both
Default Setting:
6
Options:
Any whole number between 6 and 30 VDC.
Description:
If the Voltage Alarm Enable option is set to Enabled, a trap condition occurs
if the voltage goes below the value in this parameter.
Voltage Alarm Enable
Web Parameter:
Voltage Enable check box in the SNMP Trap Limits section of the SNMP
page.
Network Type:
Both
Default Setting:
Disabled
Options:
Disabled, Enabled
Description:
Enables a trap for the supply voltage of the transceiver. The trap condition is
present based on the settings in the Voltage Alarm Above and Voltage
Alarm Below parameters.
84