Brother HL-1040 - Manual (Page 234)

USER’S GUIDE
2-6
Loading Paper into the Feeder
To load paper into the feeder, follow these steps.
1. Open the multi-purpose sheet feeder by gently pulling the lid forward
towards you. ( ➀ )
2. Load paper into the multi-purpose sheet feeder with the printing
surface face down. ( ➁ )
!
Caution
The feeder can hold up to 200 sheets of plain paper (75 g/m 2 , 20 lb.).
If you load too many sheets, paper jams could occur.
Make sure that the paper is stacked below the ▼ mark.
If there is still some paper in the feeder, you must first remove it, put
it together with the new paper and then insert the stack in the feeder.
Fig. 2-4 Opening the Feeder and
Loading Paper or Envelopes in the Feeder
✒ Note
If you load envelopes in the feeder, make sure they are inserted in the
direction shown above.