Brother HL-1040 - Manual (Page 183)

9
Insert the supplied CD-ROM into the
drive of your PC.
Select “CD-ROM drive.”
Click the Next button
Click the Next button.
The USB driver is installed.
When the dialog shown above appears on
your PC, click the
Finish button.
Be sure to restart Windows 98 so that
the installed USB driver will be
effective.
When the installation of the USB driver is complete, install the printer driver.
From CD-ROM: Run the CD-ROM program and go to the ‘Install driver’ menu.
From Floppy disk: Refer to the Software Quick Setup Guide.
Set the printer port to USB
After installing the USB driver and printer driver, the printer port has to be set to ‘USB port’.
1. Click the
Start button and select Printers in Settings .
2. Select the HL-1050 icon in printers so that the HL-1050 icon is highlighted.
3. Select
Properties from File menu.
4. Click Details tab.
5. Select BRUSB :(USB Printer Port) in the box for “Print to the following port”.
6. Click OK to close the properties dialog box.
4
5
6