Brother HL-1040 - Manual (Page 185)

-11 -
Action 6: Plug in and Turn on Your Printer
1 Plug the power cord into the AC power
outlet and the printer power inlet.
✒ NOTE
The shape of the power cord varies
according to the country of destination.
2 Turn on the power switch that is located
on the left side of your printer.
3
Drum
Alarm
Ready
Paper
Data
Toner
Make sure that the READY lamp is lit after
the printer has warmed up (approximately
30 seconds).
4 Make sure that the printer automatically
ejects the starter sheet while the printer is
warming-up immediately after installing a
new drum unit.
Starter Sheet