Brother HL-1040 - Manual (Page 210)

36
Functions
TrueType Fonts
on disks TrueType-compatible soft-fonts for Windows on the supplied disk
Emulation HL-820/1020:Brother Printing Solution for Windows
HL-1040: Brother Printing Solution for Windows / Automatic
emulation selection among HP LaserJet IIP (PCL level
4), EPSON FX-850, or IBM Proprinter XL
HL-1050: Brother Printing Solution for Windows / Automatic
emulation selection among HP LaserJet 6P (PCL level 6),
EPSON FX-850, or IBM Proprinter XL
Printer Driver Windows 3.1/3.11, Windows 95/98 and Windows NT 4.0 driver,
supporting Brother Native Compression mode and bi-directional
capability
Optional Macintosh driver available for System 6.0.7 or higher (For HL-
1040/1050 Only)
Interface Bi-directional parallel
USB interface (HL-1050 only)
RS-422A/RS-232C serial interface (RS-100M) is optionally available.
(For HL-1040/1050 only)
Memory HL-820/1020/1040 : 2 MB
HL-1050: 4 MB (Expandable up to 36 MB by installing an
industry standard SIMM)
Diagnostics Self-diagnostic program
Electrical and Mechanical
Power Source U.S.A. and Canada:AC 110 to 120 V, 50 / 60 Hz
Europe and Australia:AC 220 to 240 V, 50 /60 Hz
Power
Consumption Printing: 280 W or less
Stand-by: 60 W or less
Sleep: 13 W or less
Noise Printing: 49 dB A or less
Sleep: 33 dB A or less
Temperature Operating: 10 to 32.5°C (50 to 90.5°F)
Storage: 0 to 40°C (38 to 104°F)
Humidity Operating: 20 to 80% (without condensation)
Storage: 20 to 80% (without condensation)
Dimensions
(W x H x D) 390 x 245 x 365 mm (14.4 x 9.8 x 13.9 inches)
(when the output tray is closed.)
Weight Approx. 7.2 kg (14.3 lb.) including the drum unit