IEI Integration iVW-UD322 - Manual (Page 39)

iVW-UD322iVW-UD322 Video Wall Controller
4.1.3 Remote Control
The iVW-UD322has an optional
491H491H
Figure 4-11 shows the remote control and its function keys.
Figure 4-11: Remote Control
4.1.4 Reset to Factory Default Settings
The video wall controller
sequence described below. Any custom settings will be lost during this process.
Step 1: Push the “Up
Step 2: The OSD displays a message that the settings have been reset.
Figure 4-12: Reset to Factory Defaults
UD322 Video Wall Controller
Remote Control
has an optional remote control for easy configuration of OSD settings.
shows the remote control and its function keys.
Power. Turns the controller on and off.
Menu. Enters the OSD, selects items and sets the
newvalues entered.
Left. Moves the selection left.
Right. Moves the selection right.
Up. Moves the selection up.
Down. Moves the selection down.
Enter. Exits from any menu.
: Remote Control
to Factory Default Settings
wall controller can be reset to the factory default settings by
sequence described below. Any custom settings will be lost during this process.
Up”, “Down” and “Enter” buttons simultaneously fo
The OSD displays a message that the settings have been reset.
: Reset to Factory Defaults
32
remote control for easy configuration of OSD settings.
. Enters the OSD, selects items and sets the
settings by using the key
sequence described below. Any custom settings will be lost during this process.
” buttons simultaneously for a few seconds.
The OSD displays a message that the settings have been reset. S te p 0 :