Iomega FotoShow Digital Image Center - Manual (Page 9)

Connecting Your FotoShow ™ Image Center 9
device you are connecting to has stereo sound you will also find a red (right)
AUDIO IN
connector. The red connector is optional.
4.Connect the RCA audio cable to the audio connectors on the back of your
FotoShow ™ Image Center.
Make sure you match the white cable connector with the white (left, mono) AUDIO
OUT
connector on the back of your FotoShow ™ Image Center. If you connected the
Red (right) RCA connector in step 3, make sure that you connect the red cable
connector to the red (right) AUDIO OUT connector on the back of your FotoShow
Image Center. The red connector is optional
5.Connect the power supply to your FotoShow ™ Image Center and then plug it into an
outlet. Press the POWER button on the FotoShow remote control.
Ensure the green power light on the front of the FotoShow ™ Image Center comes on
after you have connected the power supply cable.
TELEVISION BACK
AUDIO/VIDEO
IN OUT
VIDEO
LEFT
AUDIO
RIGHT
AUDIO
S-
VIDEO
VHF/UHF
Connecting Your FotoShow ™ Image Center 9