Iomega FotoShow Digital Image Center - Manual (Page 13)

Connecting Your FotoShow ™ Image Center 13
appropriate video input channel. If you hooked the audio channel to a stereo or AV
receiver turn it on.
NOTE: If you are connecting the FotoShow™ Image Center to a VCR or AV receiver,
you will need to turn on the VCR or receiver as well as the TV. You may also need
to adjust the video input on the VCR or receiver. See the user’s manual that came
with the VCR or AV receiver for more information.
7.Insert the Zip ® disk that came with your FotoShow ™ Image Center and view the
FotoShow Image Center Tutorial.
For more information on viewing the tutorial, see “Viewing the FotoShow ™ Tutorial”
at the end of this chapter.
Using the FotoShow ™ Auto Adapter
The FotoShow ™ Auto Adapter (sold separately) allows you to hook your FotoShow Image
Center to the cigarette lighter or power outlet in your vehicle. Generally, the FotoShow
Image Center will be used for portable downloads without a TV when it is connected to
the auto adapter. When used for portable downloads, you can transfer the content of
your digital camera’s SmartMedia
™ or CompactFlash ™ card to the FotoShow Image Center’s
Zip ® drive.
1.Connect the FotoShow ™ Auto Adapter to the power connector on your FotoShow
Image Center and then plug it into your vehicle’s cigarette lighter or power outlet.
2.Insert a Zip ® disk and SmartMedia ™ card, CompactFlash ™ card, or IBM ® Microdrive ™ .
Press the COPY button to transfer your digital photos to your Zip disk. For more
information on transferring images to a Zip Disk, see “Copying Files to the
FotoShow Image Center”
on page 15.
Viewing the FotoShow ™ Image Center Tutorial
1.If the FotoShow ™ Image Center is not already on, press the POWER button on the
FotoShow ™ remote control.
2.Insert the Zip ® disk that came with your FotoShow ™ Image Center.
3.The FotoShow ™ Image Center tutorial should start automatically. Press either the
BACK or SLIDESHOW button to exit the tutorial.
Connecting Your FotoShow ™ Image Center 13