46 fotoshow, Digital image center user’s manual, Ejecting zip – Iomega FotoShow Digital Image Center User Manual
Page 46: Disks, Disks without power, Ejecting compactflash, Cards and ibm, Microdrives, Caution

CAUTION!
Your FotoShow
™
Image Center is compatible with 3.3v SmartMedia
™
memory
cards only. Using a 5v SmartMedia card with your FotoShow Image Center may cause
irreparable damage to either the SmartMedia card or the FotoShow Image Center.
Ejecting Zip
®
Disks
To eject a Zip
®
disk when your drive has power, press the Eject/Activity button on the
front right side of your FotoShow
™
Image Center.
If your FotoShow
™
Image Center is attached to a computer, you may not always be able
to eject the disk. Please check the User’s Manual included on the Zip
®
disk that came
with your FotoShow Image Center for more information on ejecting Zip disks when using
the FotoShow Image Center as a USB Zip drive.
CAUTION!
Make sure that the activity and status lights are not blinking green before
removing your Zip
®
disk. Removing a Zip disk while it is being accessed may cause
irreparable data loss!
CAUTION!
To avoid damage to your FotoShow
™
Image Center’s Zip
®
drive or your Zip
disk, always remove the disk when it is not in use or before disconnecting or moving
your FotoShow
™
Image Center.
Ejecting Zip
®
Disks Without Power
The FotoShow
™
Image Center must be powered on for normal disk insertion and removal.
If you need to eject a disk during a power failure, disconnect the power supply from the
FotoShow Image Center and push a pen into the emergency disk eject hole on the back
of the drive.
CAUTION!
Never use the emergency eject procedure while the power supply is connected
to the FotoShow
™
Image Center. Never force a disk into or out of the Zip
®
drive as this
could damage the drive.
Ejecting CompactFlash
™
Cards and IBM
®
Microdrives
™
Make sure that the CompactFlash
™
/Microdrive
™
reader is not busy before ejecting. If you
are transferring files while your FotoShow
™
Image Center is connected to a TV, you should
see a dialog box on the TV screen that will show you when the transfer is complete.
When the copy completes, you can safely remove your CompactFlash card or Microdrive.
If you are using your FotoShow Image Center for portable downloads, make sure that the
activity light is off and status light is not blinking green before removing your digital film.
To remove the CompactFlash card or Microdrive, pull the card out of the card reader.
CAUTION!
To avoid damage to your CompactFlash
™
card or Microdrive™, always remove the
card when it is not in use or before disconnecting or moving your FotoShow
™
Image Center.
46
FotoShow
™
Digital Image Center User’s Manual