2 create ieee 802.1q vlan screen, 3 edit ieee 802.1q vlan screen, Figure 32 vlan: create vlan – IronPort Systems ES-1528 User Manual
Page 65: Table 13 vlan: create vlan
Chapter 8 VLAN
ES-1528 User’s Guide
65
8.2.2 Create IEEE 802.1Q VLAN Screen
See
for more information on VLANs. Click VLAN in the navigation
panel to display the IEEE 802.1Q VLAN screen as shown next.
Figure 32 VLAN: Create VLAN
The following table describes the labels in this screen.
8.2.3 Edit IEEE 802.1Q VLAN Screen
See
for more information on VLANs. Click VLAN in the navigation
panel to display the IEEE 802.1Q VLAN screen as shown next.
Table 13 VLAN: Create VLAN
LABEL
DESCRIPTION
New VLAN ID
Enter the VLAN ID of the VLAN you want to create.
ALL
This button allows you to configure all the ports at once. Click this button to change
the state of all the ports at once. The possible states are:
empty - This indicates that the port is not part of the VLAN.
T - This indicates that this port is a member of the VLAN. When the packet leaves
the member port, the VLAN tag is added.
U - This indicates that this port is a member of the VLAN. When the packet leaves
the member port, the VLAN tag is removed.
1...28
These buttons allow you to specify whether the individual ports are members of this
VLAN. Click the buttons below the numbers to change the state of the ports. The
possible states are:
empty - This indicates that the port is not part of the VLAN.
T - This indicates that this port is a member of the VLAN. When the packet leaves
the member port, the VLAN tag is added.
U - This indicates that this port is a member of the VLAN. When the packet leaves
the member port, the VLAN tag is removed.
Create
Click Create to add this VLAN to the switch.
Cancel
Click Cancel to return to the VLAN status screen without making any changes.