IronPort Systems ES-1528 - Manual (Page 108)

Chapter 18 SNMP
ES-1528 User’s Guide
108
18.2.1 SNMP Group - Create
Click on the Create New Group link in the SNMP Group screen to add an SNMP group. The
screen displays as shown.
Figure 60 SNMP Group - Create
The following table describes the labels in this screen.
Group ID This field indicates the group number. It is used for identification only. Click on the
individual group number to edit the group settings.
Group Name This field displays the name of the SNMP group.
SNMP Version This field indicates which SNMP version this group uses to manage the switch.
Authentication This field indicates whether authentication is required for members of this group.
Authentication can only be configured for SNMP v3.
Access This field indicates the rights this group has for SNMP management. “R” indicates
that this group has read rights and “W” indicates that this group has write rights on
the switch.
Previous Page/
Next Page
Use these navigation links to browse all of your SNMP groups.
Table 40 SNMP Group (continued)
LABEL DESCRIPTION
Table 41 SNMP Group - Create
LABEL DESCRIPTION
Group Name Specify the name for this SNMP group.
SNMP Version Specify the SNMP version this group uses to manage the switch.
Authentication This field is only editable if you select SNMPv3 in the SNMP Version field. Select
Enabled to force SNMP v3 groups to authenticate with the switch or select Disabled
to deactivate authentication for the SNMP v3 groups. For SNMP v1 and SNMP v2c
authentication is always disabled.
Access Read - select Enabled to allow this group to collect information from this switch.
Write - select Enabled to allow this group to create or edit SNMP objects.
Create Click this to add this SNMP group to the switch.
Note: A maximum of ten groups can be created on the switch.
Cancel Click this to go back to the main SNMP Group screen without saving your changes.