IronPort Systems ES-1528 - Manual (Page 52)

Chapter 5 System
ES-1528 User’s Guide
52
Figure 23 Restore Configuration Error
You can click Retry to locate the proper configuration file.
5.2 System: Change Password
Use the Change Password screen to change the administrator username and password for the
switch. Click System > Password to view the screen as shown.
Figure 24 System: Password
The following table describes the labels in this screen.
5.3 Firmware Upgrade
Make sure you have downloaded (and unzipped) the correct model firmware and version to
your computer before uploading to the device.
1
Be sure to upload the correct model firmware as uploading the wrong model
firmware may damage your device.
Table 7 Change Password
LABEL DESCRIPTION
Old Password Type the existing system password (admin is the default password when shipped).
New Password Enter your new system password. Enter up to 15 alpha-numeric characters; spaces
are allowed.
Confirm New
Password
Retype your new system password for confirmation