3 viewing arp table entries, Figure 84 dynamic arp, Table 65 arp table – IronPort Systems ES-1528 User Manual
Page 134

Chapter 20 Dynamic ARP
ES-1528 User’s Guide
134
Figure 84 Dynamic ARP
The following table describes the labels in this screen.
20.3 Viewing ARP Table Entries
Click Dynamic ARP > ARP Entries in the navigation panel to open the following screen.
Use this screen to view and add entries to the ARP table.
Table 65 ARP Table
LABEL
DESCRIPTION
Enable
Dynamic ARP
Select or deselect this to activate or deactivate Dynamic ARP on the switch.
Aging Time
Specify how long (in hours) the switch remembers the learned ARP table entries.
Specify “0” to have the switch remember the ARP table entries for an unlimited time
period.
Trusted ports
Packets arriving on trusted ports bypass all Dynamic ARP validation checks, and
those arriving on untrusted ports undergo the validation process. Default state of all
ports is untrusted.
Select the trusted ports for each Dynamic ARP configuration you set up.
Enable
Dynamic ARP
for VLAN from
.. to ..
Select the range of VLANs you want to perform validation checks based on the ARP
entries in the ARP table.
Disable
Dynamic ARP
for VLAN from
.. to ..
Select the range of VLANs you want to bypass validation checks based on the ARP
entries in the ARP table.
Current
Enabled
VLAN
This field shows the VLANs for which Dynamic ARP validation is enabled.
Apply
Click this to save your settings to the switch.