Inter-Tel 8690 - Manual (Page 53)

39
Inter-Tel ® Model 8690 Endpoint User Guide
BA
S
IC
FEA
T
URES
Using the Mute Feature
The Mute feature disables your microphone to prevent other parties from hearing you.
To enable/disable mute from the Active Calls view:
1. During the call, press and hold the stylus on a displayed call to display the Con-
text menu.
2. Tap Audio - Mute .
To enable/disable Mute from the endpoint interface: During the call, tap .
Displaying Your User Information
You can temporarily display your user information and the system time and date.
To display user and system information: Tap
.
Displaying Caller ID Information
Use Caller ID to display the caller’s name or number (if available) and the elapsed
time of the call, toggling between the name and number.
To display caller ID information: Tap (Caller ID toggle).
Blocking Outbound Caller ID Information
You can block your Caller ID information from displaying on the current call. *
To block outbound Caller ID for the current call: Tap , and then enter
the number (the number is immediately dialed).
To unblock outbound Caller ID (if set to always blocked): Tap
.
6 5
JOHN SMITH
:08
480-961-9000
:08
Caller Name on Caller Name off
3 4
* “All call” Outbound Caller ID settings are enabled/disabled by the system administrator.
6 7
8 2