Inter-Tel 8690 - Manual (Page 3)

1
Q
UICK
R
EFERENCE
G
UIDE FOR
F
REQUENTLY
U
SED
F
EATURES
This guide provides basic instructions for frequently used system features. Refer
to the user guide for more information on these and other features.
P LACING AN E MERGENCY C ALL
Dial ( / Eur.) to place an emergency call. You do
not have to select an outside line first.
If your endpoint is locked, you can still use it to dial emergency service num-
bers. Tap
after dialing the emergency service number to immediately place
the call ( ). Otherwise, there will be a 4-second system pause
before the system places the call. Refer to Locking Your Endpoint in the
Advanced Features section of the user guide for more information.
P LACING AN I NTERCOM C ALL
With or without the handset lifted, dial the subscriber’s extension number. When
using Auto Answer, speak when the intercom (IC) confirmation appears.
P LACING AN O UTSIDE C ALL
1. With or without the handset lifted, do one of the following from the end-
point interface:
• Tap the Outgoing Call access code (
).
• Tap OUTGOING .
2. Dial the number.
A NSWERING A C ALL
To answer a call, do one of the following:
• Lift the handset.
• From the endpoint interface, tap the flashing
button.
• Tap from the Active Calls view.
• From the endpoint interface, tap (for handsfree calls).
To answer a waiting call, either end your current call or place it on hold. Then
answer the call as described above.
IMPORTANT
Before using your endpoint, contact your system administrator
to make sure your system is correctly configured for emer-
gency service.
9 1 1 9 9 9 1 1 2
#
9 1 1 #
9
© Inter-Tel (Delaware), Inc. October 2006 printed in U.S. Part no. 835.3067