Inter-Tel 8690 - Manual (Page 33)

19
Inter-Tel ® Model 8690 Endpoint User Guide
GETTING
ST
A
R
TED
Changing Behavior Settings
You can change the ring tone, display window, and flash message lamp settings.
To specify a custom ring tone:
1. Tap - Options - Behavior .
2. Select Specify custom ring .
3. Tap Browse , and then navigate to Mounted Volume - 8690 Phone .
4. Select the.wav file to be used as the ring tone, and then tap OK . (The audio file
must be in the following format: CM 11.025 kHz, 8 Bit, Mono.)
To change the display window options:
1. Tap - Options - Behavior .
2. Select or clear either or both of the following Display window when options:
• Phone goes off hook: If this box is selected, the endpoint interface displays
when you lift the handset or tap .
• Incoming call received: If this box is selected, the endpoint interface dis-
plays when your endpoint receives a call
3. Tap OK .
To enable or disable the Message lamp:
1. Tap - Options - Behavior .
2. Do one of the following:
• To enable the Message lamp, select the
Flash message lamp for new mes-
sages check box.
• To disable the Message lamp, clear the Flash message lamp for new mes-
sages check box.
3. Tap OK .