Resetting the endpoint, Running the setup wizard, Caution – Inter-Tel 8690 User Manual
Page 37
23
Inter-Tel
®
Model 8690 Endpoint User Guide
GETTING
ST
A
R
TED
Resetting the Endpoint
If your endpoint has a Reset button on the back, pressing it immediately shuts down
the operating system and any applications that are currently running on the endpoint,
the screen goes blank, and the default settings are restored. After a few moments the
operating system restarts, and the client application re-opens when network connec-
tivity is re-established.
Resetting the endpoint restarts the Windows CE .NET operating system and Inter-Tel
Personal Communicator.
To reset the endpoint:
1.
Tap
- Advanced -
Reset Phone
.
2.
Tap
Yes
to reset the endpoint, or tap
No
to exit.
Resetting the Endpoint to the Default Configuration
Do not reset the endpoint to the default configuration unless instructed to do so by
your system administrator.
The Default Configuration
option restores configuration to the default state. When
this option is selected, your network administrator will need to reconfigure the net-
work settings if they differ from the default settings. In addition, you will need to re-
enter your logon information (see
).
To reset the endpoint to the default configuration:
1.
Tap
- Advanced -
Default Configuration
.
2.
Tap
Yes
to reset to the default configuration, or tap
No
to exit.
Running the Setup Wizard
Do not run the Setup Wizard unless you are instructed to do so by your system admin-
istrator.
To run the Setup Wizard: Tap
- Advanced -
Run Setup Wizard
, and then follow
the setup instructions.
CAUTION
Endpoint Damage Hazard. Do not reset the endpoint unless instructed to do so
by your system or network administrator. Desktop shortcuts and any preferences
that have not been saved in the registry are lost when you reset the endpoint.
Additional programming may be also be required to restore the endpoint to its pre-
vious operational state.